{"id":3344,"date":"2025-08-16T12:29:40","date_gmt":"2025-08-16T04:29:40","guid":{"rendered":"https:\/\/www.wolframcarbide.com\/?post_type=product&p=3344"},"modified":"2025-08-20T15:50:38","modified_gmt":"2025-08-20T07:50:38","slug":"tungsten-karbur-orsler","status":"publish","type":"product","link":"https:\/\/www.wolframcarbide.com\/tr\/product\/tungsten-carbide-anvils\/","title":{"rendered":"Y\u00fcksek performansl\u0131 tungsten karb\u00fcr \u00f6rs \u00fcreticisi YG8"},"content":{"rendered":"
Grades of tungsten carbide anvils:<\/strong><\/h5>\n\n\n\n\n\n
 <\/p>\n

Grade<\/strong><\/td>\n

 <\/p>\n

Co%<\/strong><\/td>\n

 <\/p>\n

Density(g\/cm\u00b3)<\/strong><\/td>\n

 <\/p>\n

Hardness (HRA<\/a>)<\/strong><\/td>\n

 <\/p>\n

TRS<\/strong>
\n(N\/mm\u00b2)<\/strong><\/td>\n<\/tr>\n

BTN8<\/td>\n8<\/td>\n14.7<\/td>\n91.5<\/td>\n3500<\/td>\n<\/tr>\n
BTN10<\/td>\n10<\/td>\n14.5<\/td>\n92<\/td>\n3800<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sizes of tungsten carbide anvils (MM):<\/strong><\/p>\n

\"carbide<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Type<\/strong><\/td>\nD<\/strong><\/td>\n<\/td>\nE<\/strong><\/td>\n<\/td>\nH<\/strong><\/td>\n<\/td>\na<\/strong><\/td>\n<\/tr>\n
<\/td>\nMetric size<\/td>\nAllowable deviation<\/td>\nMetric size<\/td>\nAllowable deviation<\/td>\nMetric size<\/td>\nAllowable deviation<\/td>\n\n

46\u00b0<\/p>\n<\/td>\n<\/tr>\n

TCA636<\/td>\n105.5<\/td>\n+1.5
\n-0.5<\/td>\n		35.6<\/td>\n\u00b10.5<\/td>\n76<\/td>\n+2.0
\n-0.5<\/td>\n		46\u00b0<\/td>\n<\/tr>\n
TCA646<\/td>\n116<\/td>\n+1.7
\n-0.5<\/td>\n		43<\/td>\n\u00b10.6<\/td>\n82.5<\/td>\n+2.0
\n+0.5<\/td>\n		46\u00b0<\/td>\n<\/tr>\n
TCA645-2<\/td>\n129<\/td>\n2<\/td>\n44.5<\/td>\n\u00b10.5<\/td>\n96<\/td>\n+2.5
\n+0.5<\/td>\n		46\u00b0<\/td>\n<\/tr>\n
TCA647-2<\/td>\n122<\/td>\n+2.0
\n+0.7<\/td>\n		47<\/td>\n\u00b10.5<\/td>\n90<\/td>\n+2.0
\n+0.7<\/td>\n		46\u00b0<\/td>\n<\/tr>\n
TCA648<\/td>\n129<\/td>\n+3.6
\n+1.6<\/td>\n		48<\/td>\n\u00b10.5<\/td>\n101<\/td>\n1<\/td>\n46\u00b0<\/td>\n<\/tr>\n
TCA648-6<\/td>\n129<\/td>\n2<\/td>\n47.5<\/td>\n\u00b10.5<\/td>\n96.4<\/td>\n1<\/td>\n46\u00b0<\/td>\n<\/tr>\n
TCA652<\/td>\n129<\/td>\n+1.5
\n-0.5<\/td>\n		52<\/td>\n\u00b10.5<\/td>\n93<\/td>\n+2.0
\n+1.0<\/td>\n		46\u00b0<\/td>\n<\/tr>\n
TCA661<\/td>\n160<\/td>\n+2.5
\n+1.5<\/td>\n		61<\/td>\n\u00b10.5<\/td>\n115<\/td>\n+2.5
\n+1.5<\/td>\n		46\u00b0<\/td>\n<\/tr>\n
TCA665-6<\/td>\n175<\/td>\n+4.0
\n+2.0<\/td>\n		65.5<\/td>\n\u00b10.5<\/td>\n129<\/td>\n+3.0
\n+1.0<\/td>\n		46\u00b0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\"Tungsten<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Series<\/strong><\/td>\nType<\/strong><\/td>\nDimensions<\/strong><\/td>\n<\/tr>\n
<\/td>\n<\/td>\nD<\/strong><\/td>\nE<\/strong><\/td>\nH<\/strong><\/td>\nF<\/strong><\/td>\n\u03b2<\/strong><\/td>\n<\/tr>\n
 <\/p>\n

\u03c6103<\/td>\n

GDC\u03a6103\/32.5\u00d712.5\u00d741\u00d776<\/td>\n103<\/td>\n32.5<\/td>\n76<\/td>\n12.5<\/td>\n41\u00b0<\/td>\n<\/tr>\n
GDC\u03c6103\/32.5\u00d711.5\u00d741\u00d775.5<\/td>\n103<\/td>\n32.5<\/td>\n75.5<\/td>\n11.5<\/td>\n41\u00b0<\/td>\n<\/tr>\n
\n

\u03c6105<\/p>\n<\/td>\n

GDC\u03c6105\/32.5\u00d712.5\u00d741.5\u00d775.5<\/td>\n105<\/td>\n32.5<\/td>\n75.5<\/td>\n12.5<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03c6105\/33\u00d712.5\u00d741\u00d776<\/td>\n105<\/td>\n33<\/td>\n76<\/td>\n12.5<\/td>\n41\u00b0<\/td>\n<\/tr>\n
\n

\u03c6110<\/p>\n<\/td>\n

GDC\u03c6110.2\/38\u00d713\u00d741.5\u00d780<\/td>\n110.2<\/td>\n38<\/td>\n80<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03c6110.3\/39\u00d713\u00d741.5\u00d780<\/td>\n110.3<\/td>\n39<\/td>\n80<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03c6114<\/td>\nGDC\u03c6114.6\/39.5\u00d713\u00d741.5\u00d782.5<\/td>\n114.6<\/td>\n39.5<\/td>\n82.5<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

 <\/p>\n

\u03a6115<\/p>\n<\/td>\n

GDC\u03c6115\/38\u00d713\u00d741\u00d782.5<\/td>\n115<\/td>\n38<\/td>\n82.5<\/td>\n13<\/td>\n41\u00b0<\/td>\n<\/tr>\n
GDC\u03c6115.1\/38.5\u00d714\u00d741.5\u00d782.5<\/td>\n115.1<\/td>\n38.5<\/td>\n82.5<\/td>\n14<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6115.6\/39.5\u00d713\u00d741.5\u00d782.5<\/td>\n115.6<\/td>\n39.5<\/td>\n82.5<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6115.3\/39\u00d713\u00d741.5\u00d782.5<\/td>\n115.3<\/td>\n39<\/td>\n82.5<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6115.9\/40\u00d713\u00d742\u00d782.5<\/td>\n115.9<\/td>\n40<\/td>\n82.5<\/td>\n13<\/td>\n42\u00b0<\/td>\n<\/tr>\n
GDC\u03c6115.2\/41\u00d713\u00d742\u00d782.5<\/td>\n115.2<\/td>\n41<\/td>\n82.5<\/td>\n13<\/td>\n42\u00b0<\/td>\n<\/tr>\n
GDC\u03a6115\/41\u00d713\u00d741.5\u00d782.5<\/td>\n115<\/td>\n41<\/td>\n82.5<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

\u03c6122<\/p>\n<\/td>\n

GDC\u03c6112\/43\u00d712\u00d741\u00d791<\/td>\n112<\/td>\n43<\/td>\n91<\/td>\n12<\/td>\n41\u00b0<\/td>\n<\/tr>\n
GDC\u03c6112.3\/43\u00d713\u00d741\u00d791<\/td>\n112.3<\/td>\n43<\/td>\n91<\/td>\n13<\/td>\n41\u00b0<\/td>\n<\/tr>\n
GDC\u03a6112.4\/43\u00d713\u00d741.5\u00d791<\/td>\n112.4<\/td>\n43<\/td>\n91<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6112.8\/43.5\u00d713\u00d741.5\u00d790<\/td>\n112.8<\/td>\n43.5<\/td>\n90<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
 <\/p>\n

 <\/p>\n

 <\/p>\n

\u03c6127<\/p>\n<\/td>\n

GDC\u03a6127\/43.5\u00d713\u00d741.5\u00d795<\/td>\n127<\/td>\n43.5<\/td>\n95<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6127.8\/43.5\u00d713\u00d741\u00d795<\/td>\n127.8<\/td>\n43.5<\/td>\n95<\/td>\n13<\/td>\n41\u00b0<\/td>\n<\/tr>\n
GDC\u03a6127.3\/44\u00d713\u00d741.5\u00d795<\/td>\n127.3<\/td>\n44<\/td>\n95<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6127.4\/46\u00d713.5\u00d741.5\u00d795<\/td>\n127.4<\/td>\n46<\/td>\n95<\/td>\n13.5<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
GDC\u03a6127.8\/46\u00d712\u00d741.5\u00d795<\/td>\n127.8<\/td>\n46<\/td>\n95<\/td>\n12<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03c6128<\/td>\nGDC\u03c6128\/46\u00d713\u00d741.5\u00d795<\/td>\n128<\/td>\n46<\/td>\n95<\/td>\n13<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03c6142<\/td>\nGDC\u03c6142\/49\u00d715\u00d741.5\u00d7102<\/td>\n142<\/td>\n49<\/td>\n102<\/td>\n15<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03a6148<\/td>\nGDC\u03c6148.5\/54\u00d715\u00d741.5\u00d7100<\/td>\n148<\/td>\n54<\/td>\n100<\/td>\n15<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03a6160<\/td>\nGDC\u03a6160\/55.5\u00d715\u00d741.5\u00d7115<\/td>\n160<\/td>\n55.5<\/td>\n115<\/td>\n15<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03a6175<\/td>\nGDC\u03a6175\/63\u00d715\u00d741.5\u00d7128<\/td>\n175.32<\/td>\n63<\/td>\n128<\/td>\n15<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03a6160<\/td>\nGDC\u03a6160\/57\u00d715\u00d741.5\u00d7115<\/td>\n160<\/td>\n57<\/td>\n115<\/td>\n15<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n
\u03c6199<\/td>\nGDC\u03c6199\/76\u00d722\u00d741.5\u00d7142<\/td>\n199<\/td>\n76<\/td>\n142<\/td>\n22<\/td>\n41.5\u00b0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Custom sizing is also available. Please provide us with your specifications.<\/strong><\/p>\n

 <\/p>\n

Tungsten carbide anvils pressing 1200T, which can make OD 240MM anvils:<\/strong><\/h5>\n

\"carbide<\/p>\n

 <\/p>\n

Details of carbide anvils:<\/strong><\/h5>\n

\"carbide<\/p>\n

<\/h5>\n
Three-coordinate dimensional inspection of precision-ground tungsten carbide anvil:<\/strong><\/h5>\n

\"Tungsten<\/a><\/p>\n

<\/h5>\n
Precautions for using of carbide anvils:<\/strong><\/h5>\n

1.Residual Stress Relief
\nAnvils retain residual stress after finish machining. Prior to use, aging treatments such as natural aging, oven aging, oil boiling, vacuum aging, or ultrasonic aging must be performed. Natural aging requires \u22651 month; oven aging must be conducted at \u2264250\u00b0C for \u226572 hours.<\/p>\n

2.Anvil Assembly Specifications
\nThe tapers of the anvils and steel rings must match, with a contact area \u226590%. Press-fit height should be 8\u201310 mm for diameters <127 mm and 10\u201312 mm for diameters \u2265127 mm. Avoid point contact between anvils and size spacers to prevent stress concentration.<\/p>\n

3.Raw\/Auxiliary Material Requirements<\/p>\n

Steel rings and size spacers must meet machining accuracy standards. Inner wall surface finish of steel rings: Ra 1.6. Ovality and taper must match anvil geometric tolerances. Size spacer parallelism \u22640.02 mm; hardness must be appropriate.<\/p>\n

Pyrophyllite roasting temperature and duration must be controlled to ensure proper pressure transmission and prevent moisture-related explosions.<\/p>\n

Conductive steel rings must be rust-free, crack-free, stored dry, and show no blueing (oxidation) after baking.<\/p>\n

4.Equipment Requirements
\nThe press must have precise adjustment capability, no leaks, and synchronism\/neutrality deviation \u22640.2 mm.<\/p>\n

5.Operational Requirements
\nDuring assembly:<\/p>\n

Inspect pyrophyllite for cracks\/impurities and verify correct orientation of thin\/thick steel discs.<\/p>\n

Clean all six anvil surfaces before installation to avoid crushing or electrical discharge.<\/p>\n

Ensure all four sides of each anvil are properly aligned to prevent failure\/explosion.<\/p>\n

Check cylinder movement: fixed cylinders must not misoperate; moving cylinders must pause at position.<\/p>\n

Maintain pressure for \u22651 minute after heating stops to prevent rupture during pressure release.<\/p>\n

 <\/p>\n

 <\/p>\n

Please send us inquiries for quotations and free samples for testing:<\/strong><\/p>\n