{"id":3504,"date":"2025-10-18T11:44:35","date_gmt":"2025-10-18T03:44:35","guid":{"rendered":"https:\/\/www.wolframcarbide.com\/?post_type=product&p=3504"},"modified":"2025-10-19T23:24:49","modified_gmt":"2025-10-19T15:24:49","slug":"frez-z-weglikow-spiekanych","status":"publish","type":"product","link":"https:\/\/www.wolframcarbide.com\/pl\/product\/tungsten-carbide-end-mill\/","title":{"rendered":"Trwa\u0142e, wysokiej jako\u015bci frez z w\u0119glik\u00f3w spiekanych"},"content":{"rendered":"
Tungsten carbide end mill blanks<\/a> grades:<\/strong><\/h5>\n\n\n\n\n\n\n\n\n\n
Grade<\/strong><\/td>\nISO Grade<\/strong><\/td>\nWC<\/strong>
\n(%)<\/strong><\/td>\n		Co<\/strong>
\n(%)<\/strong><\/td>\n		Grain Size<\/strong>
\n(\u03bcm)<\/strong><\/td>\n		Hardness<\/strong>
\n\uff08HRA<\/a>\uff09<\/strong><\/td>\n		Density<\/strong>
\n\uff08g\/cm\u00b3\uff09<\/strong><\/td>\n		TRS<\/strong>
\n\uff08N\/mm\u00b2\uff09<\/strong><\/td>\n<\/tr>\n
BU06<\/td>\nK05 – K10<\/td>\n94<\/td>\n6<\/td>\n0.5<\/td>\n94<\/td>\n14.75<\/td>\n3600<\/td>\n<\/tr>\n
YG10X<\/td>\nK20 – K30<\/td>\n90<\/td>\n10<\/td>\n0.8<\/td>\n91.5<\/td>\n14.35<\/td>\n3600<\/td>\n<\/tr>\n
BT15<\/td>\nK20 – K30<\/td>\n90<\/td>\n10<\/td>\n0.7<\/td>\n92.2<\/td>\n14.35<\/td>\n3900<\/td>\n<\/tr>\n
BT20<\/td>\nK20 – K30<\/td>\n90<\/td>\n10<\/td>\n0.6<\/td>\n92.3<\/td>\n14.4<\/td>\n4000<\/td>\n<\/tr>\n
BT25<\/td>\nK30 – K40<\/td>\n88<\/td>\n12<\/td>\n0.6<\/td>\n92.5<\/td>\n14.1<\/td>\n4000<\/td>\n<\/tr>\n
BT25UF<\/td>\nK30 – K40<\/td>\n88<\/td>\n12<\/td>\n0.4<\/td>\n92.8<\/td>\n14.05<\/td>\n4200<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Grade BU06: This grade is suitable for machining aluminum magnesium alloy, graphite, plastic, wood and composite material, etc.<\/p>\n

Grade YG10X: This grade is suitable for machining materials such as common steel, non-ferrous metals, and cast iron, etc. It can process materials with hardness up to HRC 45.<\/p>\n

Grade BT15: This grade is suitable for machining common steel, cast iron, stainless steel, heat-resistant steel, chilled hardened steel, nickel base alloy and titanium alloy, etc. It can process materials with hardness up to HRC 55.<\/p>\n

Grade BT20: This grade is suitable for machining stainless steel, heat-resistant steel, chilled hardened steel, cast iron, nickel base alloy and titanium alloy, etc. It can process materials with hardness up to HRC 55.<\/p>\n

Grade BT25: This grade is suitable for machining alloy steel, titanium alloy, chilled hardened steel cast iron, aluminium alloy, etc. It can process materials with hardness up to HRC 58.<\/p>\n

Grade BT25UF: This grade is suitable for machining alloy steel, stainless steel, aluminium alloy, chilled hardened steel and titanium alloy, etc. It can process materials with hardness up to HRC 65.<\/p>\n

 <\/p>\n

Tungsten carbide end mill sizes:<\/strong><\/h5>\n

\"carbide<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Specification<\/strong><\/td>\nDiameter<\/strong><\/td>\nCutting Length<\/strong><\/td>\nShank<\/strong><\/td>\nTotal length<\/strong><\/td>\nFlutes<\/strong><\/td>\n<\/tr>\n
3*8*3*50<\/td>\n3<\/td>\n8<\/td>\n3<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
3*12*3*75<\/td>\n3<\/td>\n12<\/td>\n3<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
3*15*3*100<\/td>\n3<\/td>\n15<\/td>\n3<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
1*3*4*50<\/td>\n1<\/td>\n3<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
1.5*4*4*50<\/td>\n1.5<\/td>\n4<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
2*5*4*50<\/td>\n2<\/td>\n5<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
2.5*7*4*50<\/td>\n2.5<\/td>\n7<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
3*8*4*50<\/td>\n3<\/td>\n8<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
3.5*10*4*50<\/td>\n3.5<\/td>\n10<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
4*10*4*50<\/td>\n4<\/td>\n10<\/td>\n4<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
4*16*4*75<\/td>\n4<\/td>\n16<\/td>\n4<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
4*20*4*100<\/td>\n4<\/td>\n20<\/td>\n4<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
5*13*5*50<\/td>\n5<\/td>\n13<\/td>\n5<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
5*20*5*75<\/td>\n5<\/td>\n20<\/td>\n5<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
5*25*5*100<\/td>\n5<\/td>\n25<\/td>\n5<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
1*3*6*50<\/td>\n1<\/td>\n3<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
1.5*4*6*50<\/td>\n1.5<\/td>\n4<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
2*5*6*50<\/td>\n2<\/td>\n5<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
2.5*7*6*50<\/td>\n2.5<\/td>\n7<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
3*8*6*50<\/td>\n3<\/td>\n8<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
3.5*10*6*50<\/td>\n3.5<\/td>\n10<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
4*10*6*50<\/td>\n4<\/td>\n10<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
4.5*12*6*50<\/td>\n4.5<\/td>\n12<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
5*13*6*50<\/td>\n5<\/td>\n13<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
5.5*15*6*50<\/td>\n5.5<\/td>\n15<\/td>\n6<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
6*15*6*50<\/td>\n6<\/td>\n15<\/td>\n9<\/td>\n50<\/td>\n2\/4<\/td>\n<\/tr>\n
6*25*6*75<\/td>\n6<\/td>\n25<\/td>\n6<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
6*30*6*100<\/td>\n6<\/td>\n30<\/td>\n6<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
6*40*6*150<\/td>\n6<\/td>\n40<\/td>\n6<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
7*18*8*60<\/td>\n7<\/td>\n18<\/td>\n8<\/td>\n60<\/td>\n2\/4<\/td>\n<\/tr>\n
8*20*8*60<\/td>\n8<\/td>\n20<\/td>\n8<\/td>\n60<\/td>\n2\/4<\/td>\n<\/tr>\n
8*28*8*75<\/td>\n8<\/td>\n28<\/td>\n8<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
8*35*8*100<\/td>\n8<\/td>\n35<\/td>\n8<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
8*50*8*150<\/td>\n8<\/td>\n50<\/td>\n8<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
9*23*10*75<\/td>\n9<\/td>\n23<\/td>\n10<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
10*25*10*75<\/td>\n10<\/td>\n25<\/td>\n10<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
10*40*10*100<\/td>\n10<\/td>\n40<\/td>\n10<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
10*50*10*150<\/td>\n10<\/td>\n50<\/td>\n10<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
11*28*12*75<\/td>\n11<\/td>\n28<\/td>\n12<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
12*30*12*75<\/td>\n12<\/td>\n30<\/td>\n12<\/td>\n75<\/td>\n2\/4<\/td>\n<\/tr>\n
12*45*12*100<\/td>\n12<\/td>\n45<\/td>\n12<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
12*60*12*150<\/td>\n12<\/td>\n60<\/td>\n12<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
14*35*14*80<\/td>\n14<\/td>\n35<\/td>\n14<\/td>\n80<\/td>\n2\/4<\/td>\n<\/tr>\n
13*45*14*100<\/td>\n13<\/td>\n45<\/td>\n14<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
14*45*14*100<\/td>\n14<\/td>\n45<\/td>\n14<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
14*60*14*150<\/td>\n14<\/td>\n60<\/td>\n14<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
15*45*16*100<\/td>\n15<\/td>\n45<\/td>\n16<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
16*45*16*100<\/td>\n16<\/td>\n45<\/td>\n16<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
16*60*16*150<\/td>\n16<\/td>\n60<\/td>\n16<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
18*45*18*100<\/td>\n18<\/td>\n45<\/td>\n18<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
18*70*18*150<\/td>\n18<\/td>\n70<\/td>\n18<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n
20*45*20*100<\/td>\n20<\/td>\n45<\/td>\n20<\/td>\n100<\/td>\n2\/4<\/td>\n<\/tr>\n
20*70*20*150<\/td>\n20<\/td>\n70<\/td>\n20<\/td>\n150<\/td>\n2\/4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Our company supports customization of carbide end mill size and shape, welcome to send us drawings.<\/strong><\/p>\n

 <\/p>\n

Carbide end mill details:<\/strong><\/h5>\n

\"tungsten<\/p>\n

\"carbide<\/p>\n

\"tungsten<\/p>\n

\"tungsten<\/p>\n

\"carbide<\/p>\n

Coating\uff1a<\/strong><\/h5>\n\n\n\n\n\n\n\n\n\n
Details<\/strong><\/td>\nTiN<\/strong><\/td>\nTiAIN<\/strong><\/td>\nAITiN<\/strong><\/td>\nTISIN<\/strong><\/td>\nNano Blue<\/strong><\/td>\nDLC<\/strong><\/td>\n<\/tr>\n
Color<\/td>\nGolden<\/td>\nPurple<\/td>\nBlack<\/td>\nantique
\nbrass<\/td>\n		Dazzle blue<\/td>\nDazzle black<\/td>\n<\/tr>\n
HV<\/td>\n2300<\/td>\n3200<\/td>\n3400<\/td>\n3600<\/td>\n42(GPA)<\/td>\n1000~4000<\/td>\n<\/tr>\n
Thickness\/
\n\u03bcm<\/td>\n		0.4<\/td>\n0.5<\/td>\n0.5<\/td>\n0.4<\/td>\n0.4<\/td>\n0.5-2.0<\/td>\n<\/tr>\n
Friction
\ncoefficient<\/td>\n		0.4<\/td>\n0.35<\/td>\n0.4<\/td>\n0.45<\/td>\n0.4<\/td>\n0.05<\/td>\n<\/tr>\n
MAX
\nTemperature<\/td>\n		500<\/td>\n800<\/td>\n900<\/td>\n1000<\/td>\n1200<\/td>\n400<\/td>\n<\/tr>\n
Description<\/td>\n <\/p>\n

Cost-effective.<\/td>\n

 <\/p>\n

General.<\/td>\n

High speed milling and
\nhigh HRC material.<\/td>\n		Processing
\ncopper,
\ntitanium and
\nmold Steel.<\/td>\n		General
\nhigh speed
\nmilling.<\/td>\n		Non-ferrous
\nmetals,
\ngraphite and
\nplastics.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Please send us inquiries for quotations and free samples for testing:<\/strong><\/p>\n

 <\/p>\n